Corporate HVAC Design Training for UAE Engineering Teams
HVAC design training for consultants, contractors and facility teams: heat loads in HAP, air and water distribution, ventilation, controls and energy, applied to hot-climate buildings.
About This Programme for UAE Teams
In the UAE, cooling is usually the largest MEP system in a building and a major running cost for owners. Oversized plant wastes capital. Undersized plant leads to complaints. Poorly designed ducts and controls waste energy every hour of every day. Our corporate HVAC design training Dubai programme gives your engineers a solid, shared approach to load calculation, system selection, duct and pipe design, ventilation and controls. Teams practise heat load modelling in HAP, size ducts and chilled water networks, and review how BMS controls and energy management affect performance. Consultants gain consistent design reports. Contractors gain engineers who understand why a system is laid out as it is. Facility teams learn how to run the systems they inherit more efficiently.
Corporate HVAC design training is team-based training for a company's mechanical engineers and draughtspersons on calculating cooling loads, selecting systems and designing air and water distribution for buildings. It is usually delivered with HAP software and adapted to the firm's project types and design standards.
What Your Company Gains
- Load calculations that follow one documented method across the team
- Equipment selections that are easier to justify to clients and reviewers
- Duct and pipe layouts that need fewer site changes
- Better awareness of energy use and efficiency in design decisions
- Facility engineers who can tune controls instead of only reacting to complaints
Who This Training Is For
- HVAC and mechanical design engineers
- Mechanical draughtspersons
- Contractor project and site engineers
- Facility management and BMS engineers
- Energy and sustainability officers
Training Modules You Can Choose
Pick the modules that match your team. Each programme is built from these blocks after a short training needs call.
Heat load calculation with HAP
Focus: Modelling buildings and producing load reports clients can trust.
- Weather data and design conditions
- Spaces, walls, roofs and glazing
- Internal loads and schedules
- Reading and checking HAP reports
System selection
Focus: Choosing the right system for the building and the client.
- Split, VRF and packaged units
- Chilled water and district cooling connections
- AHUs and FCUs
- Comparing options on cost and maintenance
Duct design
Focus: Sizing and routing ductwork that delivers air quietly and efficiently.
- Equal friction and static regain methods
- Diffuser and grille selection
- Fan static pressure
- Duct layout drawings
Chilled water piping
Focus: Designing the water side of central plant systems.
- Pipe sizing and flow rates
- Pump selection and head calculation
- Primary and secondary circuits
- Balancing and valves
Ventilation and indoor air quality
Focus: Fresh air, exhaust and pressurisation for different space types.
- Outdoor air requirements with ASHRAE references
- Toilet and kitchen exhaust
- Car park ventilation basics
- Stair and lift pressurisation overview
BMS and energy management
Focus: How controls and monitoring keep HVAC running efficiently.
- BMS points and sequences
- Setpoints and scheduling
- Energy monitoring and reporting
- Common control faults
Tailored to Your Team
We tailor each programme through a training needs analysis covering your project types, the design guides and authority requirements you follow, your software versions and the systems you design or maintain most, such as VRF, chilled water or district cooling. The trainer reviews a sample load report or drawing where you can share one. Exercises then use similar buildings, and the depth is set separately for design engineers, draughtspersons and facility staff.
Delivery Options
In-house at your premises
In your office, engineers model their own building types in HAP and use your drawing templates for duct and pipe layouts.
At our Deira training centre
At our Deira centre we provide prepared workstations, which is useful when your staff do not all have software licences.
Live online for distributed teams
Live online training works for HAP modelling and design reviews, so teams on different sites can attend the same sessions.
Programme Formats
HAP modelling workshop
A short, intensive workshop for engineers who need to run heat load calculations in HAP to a consistent standard.
HVAC design programme for junior engineers
A multi-session programme taking new engineers from load calculation through system selection, ducts, piping and drawings.
Facility HVAC and controls workshop
For facility and BMS teams, focused on system operation, control sequences and energy use.
Design review clinic
Sessions where the trainer reviews your team's live calculations and layouts and explains improvements.
Assessment and Reporting for HR
Each participant takes a short technical check at the start and completes a practical design task at the end, such as a HAP model for a small building. The trainer shares attendance and a report with comments on each participant's work and suggested next steps. Solve Tech certificates follow successful completion; KHDA attestation applies to eligible courses only.
Industries We Train
- MEP consultancies
- HVAC and MEP contractors
- Facilities management
- District cooling and utilities
- Hospitality and healthcare estates
- Real estate developers
Related Courses for Individuals
Staff who want to study on their own can join the open batches of these courses:
Other Corporate Training Programmes
See all corporate training · How our certificates work · Photos of our labs
Corporate HVAC Design Training: FAQs
Does the training use HAP software?
Yes, heat load modelling is taught in HAP. If your firm uses a different load tool, tell us and we will confirm how the principles carry across.
Can facility management staff join with design engineers?
They can, but separate groups usually work better. Facility teams need more focus on operation and controls, while designers need calculation depth.
What is the minimum group size?
Ask us, because it depends on format and software availability. We will suggest a group size when we understand your team.
Can you train at our premises outside Dubai?
Yes, on-site training is available across the UAE on request, subject to scheduling and a suitable training room.
How do we request a proposal?
Call or WhatsApp +971 50 691 4688. After a short needs call, we send a proposal with modules, format, duration and suggested dates.