VFD Training in Dubai
The VFD Training in Dubai explains how variable frequency drives control motor speed and torque, saving energy and protecting equipment.
About the VFD course in Dubai
The VFD Training in Dubai explains how variable frequency drives control motor speed and torque, saving energy and protecting equipment. It helps electricians, maintenance technicians and engineers in the UAE who install, set up or repair drives on pumps, fans and conveyors.
A variable frequency drive (VFD) controls the speed and torque of an electric motor, which saves energy and protects equipment. It does this by changing the frequency and voltage supplied to the motor.
At Solve Tech in Deira, Dubai, the VFD course takes 40 Hours and is offered online, offline and hybrid on weekend and weekdays. It suits electrical, electronics and instrumentation engineers and maintenance technicians who work with machines and plants. You practise each topic during the session and your trainer reviews what you produce, which is how the skill sticks. Learners often pair it with PLC Training or SCADA Training. Classroom learners come to Mabrooka Building 04 on Al Muraqqabat Road, a short walk from Al Rigga Metro Exit 2, and online learners follow the same syllabus live. You can compare every option under Industrial Automation courses. Ask a training advisor for the full module list, current fee and next start date.
Watch: training at Solve Tech
Why Solve Tech
- Trainers from the fieldEngineers with design, contracting and facilities experience.
- Project-based learningYou complete the work yourself and your trainer reviews it.
- Flexible batchesWeekday, evening and weekend, in class or live online.
- KHDA-permitted instituteCourse completion certificate, with KHDA attestation for eligible courses.
- Central Deira locationNear Deira Clocktower and Al Rigga Metro Station, Exit 2.
- Honest course adviceAn advisor matches the course to your background.
What You Learn in the VFD Course in Dubai
- Explain how a VFD changes motor speed
- Select a drive for a given motor and load
- Wire power and control terminals
- Set key parameters such as ramp times and limits
- Use analogue and digital inputs for control
- Apply PID control for pumps and fans
- Reduce harmonics and EMC problems
- Diagnose common drive faults
Who Should Take the VFD Course
- Electrical maintenance technicians
- Panel builders and installers
- HVAC and pump system engineers
- Automation engineers
- Electrical graduates in industrial roles
Tools Covered in the VFD Course
- ABB drives
- Siemens drives
- Danfoss drives
- Keypad programming
- PID control
- Motor nameplate data
- Line and output reactors
Benefits of the VFD Training Course
- Drives are widely used on pumps and HVAC fans in Dubai buildings and plants.
- Parameter setup skills reduce commissioning time.
- Understanding faults helps limit downtime on production lines.
- Energy saving principles help you advise clients on efficiency.
- Wiring knowledge helps you avoid noise and earthing problems.
VFD Course Outline
Module 1: Motor and Drive Basics
- AC induction motor principles
- Slip, torque and speed
- Why variable speed helps
Module 2: VFD Components
- Rectifier, DC bus and inverter
- PWM output
- Drive ratings and selection
Module 3: Installation and Wiring
- Power and motor cables
- Control terminals and I/O
- Earthing and EMC practices
Module 4: Parameter Setup
- Motor data and auto-tune
- Ramp, limits and control modes
- Saving and copying parameters
Module 5: Applications
- PID control for pumps
- Fan and conveyor control
- Bypass and multi-pump setups
Module 6: Faults and Practical Work
- Fault codes and causes
- Harmonics and filters
- Practical exercise: commission a drive on a motor
Guides to read before you enrol
Certificate
You receive a Solve Tech course completion certificate after the course and its assessment. KHDA-attested certificates are available for eligible courses. How our certificates work
Related Industrial Automation courses
View allFAQ About VFD Courses
How long is the VFD course?
The VFD course is 40 Hours.
Who should take the VFD course?
Electrical maintenance technicians; Panel builders and installers; HVAC and pump system engineers; Automation engineers; Electrical graduates in industrial roles.
Which tools are covered in the VFD course?
ABB drives, Siemens drives, Danfoss drives, Keypad programming, PID control, Motor nameplate data, Line and output reactors.
Does the course cover a specific drive brand?
Parameter ideas are similar across brands, so the course uses common examples and shows how to find the equivalent settings on others.
Can I join without motor control experience?
Yes. Basic electrical knowledge is enough, and motor basics are covered first.
Is the VFD course available online?
Delivery modes for this course: Online, Offline, Hybrid. Ask an advisor for the next batch in the mode you prefer.
Can I attend on weekends?
This course runs on: Weekend & Weekdays.
Where is the VFD course held in Dubai?
At Solve Tech Training Institute, Office M09, Mabrooka Building 04, Al Muraqqabat Road, near Deira Clocktower. The nearest metro is Al Rigga Station, Exit 2.
What is the fee?
Fees depend on the format and batch. Send an enquiry to receive the current fee.
About Solve Tech Training Institute
Solve Tech Training Institute is a KHDA-permitted technical and occupational skills training centre in Deira, Dubai. We teach engineering, technical and professional courses in the classroom, live online and on site for companies, with trainers who work in the fields they teach. This page is published by the Solve Tech training team and was last updated in October 2026.
About usAccreditation and certificatesPhotos of our labsContact and map
Al Muraqqabat Road, near Deira Clocktower
Dubai, UAE
+971 50 691 4688